PingPlotter is not Windows-only: it has a native Mac version, and a free edition. Whether you need an alternative depends on what you want from it.
Commands tested on macOS 27.0.1 on 2026-10-20. Addresses and names in the output are replaced.
| What you want | Use | Cost model |
|---|---|---|
| A quick look at one path, in a graphical app | PingPlotter Free | Free, one target |
| Several targets at once, alerts on a trace, remote agents | PingPlotter Standard, Professional or Cloud | Subscription or perpetual licence; Cloud by subscription |
| A per-hop report in Terminal, free and open source | mtr from Homebrew, or Trippy |
Free |
| A path recorded for hours or days, with a log of every drop to send your provider | Netutilus MTR | Free app; MTR is part of Pro, a one-time purchase |
What people want from PingPlotter
PingPlotter is a ping and traceroute tool that keeps running. It probes every router on the path to a host, over and over, and graphs the delay and loss at each one over time. People reach for it for two reasons:
- To watch a path for hours. Calls freeze or a game lags a few times a day, and a single test never catches it.
- To prove it to the provider. A graph that shows loss starting at one hop and carrying on to the destination, with times, gives a support desk something concrete to check.
macOS has the two halves built in, but only as snapshots. traceroute shows the path once; ping tests only the far end. On this Mac:
$ traceroute -n -w 2 -m 20 1.1.1.1
traceroute to 1.1.1.1 (1.1.1.1), 20 hops max, 40 byte packets
1 192.168.1.1 3.542 ms 3.807 ms 6.661 ms
2 10.20.0.1 4.993 ms 4.022 ms 3.928 ms
3 172.16.10.10 5.298 ms 5.238 ms 5.444 ms
4 172.16.10.9 4.303 ms 5.878 ms 5.476 ms
5 * * *
6 1.1.1.1 14.212 ms 16.474 ms 15.816 ms
$ ping -c 30 1.1.1.1
...
--- 1.1.1.1 ping statistics ---
30 packets transmitted, 30 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 12.130/14.094/22.953/2.027 ms
Hop 5 ignores traceroute, yet all 30 pings reach the destination: that router just drops probes to itself. But two commands run once cannot catch a drop that happens at 9 pm; PingPlotter keeps the numbers for every hop over time. For a timestamped log of drops with no extra software, see how to monitor your internet connection on a Mac.
PingPlotter facts
Facts checked on 2026-10-20, on PingPlotter’s own site: Compare Products, macOS download, system requirements, release notes and the 5.27 release article. Prices are left out on purpose: see the Compare Products page.
| PingPlotter | |
|---|---|
| Maker | Pingman Tools, LLC |
| Editions | Free, Standard, Professional, Cloud |
| Platforms | Windows and macOS; Cloud also lists Linux |
| Latest Mac version | 5.28.1, released 16 Oct 2026 |
| macOS requirement | macOS 12 Monterey or later since 5.27; version 5.25.21 stays available for macOS 10.12 to 11. The requirements page lists Monterey to Sequoia (15); the 5.28.0 notes recommend that release “for everyone on macOS 27” |
| Apple silicon | Native since 5.27, first released 12 May 2026 |
| Licence model | Free edition. Standard and Professional by subscription or perpetual licence, 14-day trial. Cloud by subscription, 7-day trial |
| Targets at once | Free 1, Standard 2, Professional “100s”, Cloud customizable |
| Continuous monitoring and history | Free: 10 minutes. Standard, Professional, Cloud: yes |
| Customizable alerts | Standard, Professional, Cloud |
| Jitter and MOS, REST API | Professional, Cloud |
| Remote data collection, live data sharing | Cloud |
| Probe types on Mac | ICMP and UDP packet engines in the macOS release notes; TCP traceroute added in 5.27, with IPv6 |
Where PingPlotter is better
- Several targets at once. Standard watches two targets and Professional hundreds. Netutilus MTR traces one host per run.
- TCP and UDP traces. PingPlotter’s macOS release notes name UDP as well as ICMP probes, and 5.27 added a TCP traceroute on Mac, which matters on networks that block ICMP. Netutilus MTR sends ICMP only, over IPv4 only.
- Alerts. Standard, Professional and Cloud have customizable alerts. In Netutilus, alerts come from Uptime Monitor, which checks a host on a schedule, not from MTR.
- Jitter and MOS, and an API. Professional and Cloud measure jitter and MOS for voice quality and have a REST API.
- Someone else’s connection. PingPlotter Cloud collects data from agents installed on remote computers and shares live results. Netutilus only measures from the Mac it runs on.
- Windows and older Macs. PingPlotter runs on Windows, on macOS 12 and later, and keeps an older build for macOS 10.12 to 11. Netutilus is Mac-only and needs macOS 14.6.
If you support a team, or need to trace from a remote worker’s computer, PingPlotter is the better fit.
Free routes: PingPlotter Free, mtr, Trippy
PingPlotter Free. The free edition traces one target, and the Compare Products table gives it 10 minutes of continuous monitoring and history. That is enough for a problem you can reproduce on demand, not for a drop that comes twice a day.
mtr. The open-source command-line tool, free in Homebrew. Installed that way it needs root: Homebrew’s install note says “mtr requires root privileges so you will need to run sudo mtr.” It was not run for this page, because it needs an install and sudo:
brew install mtr
sudo mtr -rw -c 100 example.com
It gives you a report, not a history, so run it while the problem is happening. The WinMTR for Mac page covers the flags, the report columns and what to send your ISP.
Trippy. A free, open-source tool (Apache-2.0) “inspired by mtr”, also in Homebrew. It traces over ICMP, UDP and TCP, on IPv4 and IPv6, and shows charts and statistics in Terminal. On macOS it has an unprivileged mode, so it runs without sudo:
brew install trippy
trip example.com --unprivileged
Not run here either, as it needs an install. To record a connection for days in Terminal, a timestamped ping log is the simplest route; the how-to linked above shows one.
PingPlotter vs WinMTR and mtr
WinMTR is a free, open-source Windows program; on a Mac, mtr does the same job. Both give you a table of loss and delay per hop that you can save as a report. PingPlotter adds trace and timeline graphs and keeps the session’s history, which is what you need for a problem that comes and goes. For a one-off report that a support desk asks for today, mtr is enough.
The same job in Netutilus: MTR History, outage log, Uptime Monitor
Netutilus is a native network toolkit for macOS. Three of its tools cover the two jobs above, as of version 1.20.2.
MTR keeps probing every hop to one host, with no Homebrew, no Terminal and no sudo. Its History tab is the PingPlotter-like part:
- Loss heatmap. Hops down the side, time across, each cell coloured by how much that hop lost in that slice of time.
- Outage log. Each stretch of two or more lost probes in a row to the destination, with its exact start and end, even in a run that lasted days. A run keeps up to 200 of them; past that, the longest stay.
- Kept runs. The last 10 finished runs, for up to 60 days.
MTR does not stop the Mac from sleeping when idle; while it sleeps nothing is measured, and the heatmap shades that stretch grey as Not measured. To record a run and export it for your provider, see the steps on WinMTR for Mac.
Uptime Monitor is the alerting half. It checks hosts on a schedule by ping (TCP or ICMP), a web address, a certificate’s expiry or an open port, and notifies you when one goes down. It keeps the history and exports a period as a PDF report, an image, CSV or JSON.
Ping is free. It runs over ICMP or TCP, up to 10,000 probes or continuously, with a live chart that marks lost probes where they happened.
Netutilus is free to download; MTR and Uptime Monitor are part of Netutilus Pro, a one-time purchase, not a subscription. It needs macOS 14.6 or later. More on the tools: MTR for Mac, Uptime Monitor and Ping.
Which to choose
| Your case | Pick |
|---|---|
| You can reproduce the problem and want a graph now, for free | PingPlotter Free |
| You watch several targets, need TCP or UDP traces, alerts on traces or remote agents | PingPlotter Standard, Professional or Cloud |
| You are fine in Terminal and want free, open-source tools | mtr (with sudo) or Trippy (no sudo) |
| The problem comes and goes over days, and you need times to send your provider, without a subscription | Netutilus MTR and its outage log |
| You want to be told when a host goes down | Netutilus Uptime Monitor, or a paid PingPlotter edition |
Before you send anything, read the trace the same way in any of these tools: only loss that continues to the last hop is real. More in packet loss.
Note: Netutilus is made by Poteam, who publish this site.